Audio Stimulus Presentation on the Prisma

MRCONFON Audio System (Most Common)

MRCONFON Usage

Sensimetrics Earbud Audio System (Uncommon)

This system may be a benefit to studies that require audio stimulation during fmri runs, but cannot fit the standard headphones into the head coil used in their study

Usage Info for the Sensimetrics System

../_images/sensi_1.png

The control unit for the Sensimetrics Audio Earbud System is located in the cabinet near the projector (inside the control room - 3TE only)

../_images/sensi_2.png

To use the Sensimetrics Audio Earbud System, you will need to disconnect the standard MRCONFON Audio System from the Penetration Panel on both sides of the panel (control room and magnet room)

../_images/sensi_3.png ../_images/sensi_4.png ../_images/sensi_6.png ../_images/sensi_7.png

Inside the magnet room, you will need to uncoil the long cable and connect it to the earbuds

../_images/sensi_8.png ../_images/sensi_9.png ../_images/sensi_10.png

The cables and earbuds will need to reach the isocenter of the MRI scanner

../_images/sensi_11.png

Controls on the Sensimetrics Audio Earbud System

../_images/sensi_12.png